How to Set Up the ProSun Onyx Hybrid Red Light Bed

By Spray & Sun | Published: 2026-10-22

Category: How-to Guides

Learn how to install the ProSun Onyx Hybrid red light bed in your salon, from unboxing and placement to electrical setup and first-session checks.

Quick Answer

Set up the ProSun Onyx Hybrid by choosing a level, well-ventilated spot with proper electrical access, unboxing and assembling carefully, then verifying all lamps and safety features before the first session.

Why Placement and Electrical Setup Matter

The ProSun Onyx Hybrid combines UV and red light in one session, so it draws more power than a standard tanning bed. Placing it near a dedicated circuit reduces the risk of tripping breakers and keeps the red light lamps stable.

Ventilation is also key. Hybrid beds generate heat from both lamp types, and good airflow helps the bed cool down between sessions, which protects the acrylic and extends lamp life.

Lamp and Acrylic Care After Setup

After you finish the physical setup, take a few minutes to inspect the acrylic for smudges or debris. Fingerprints and dust can create hot spots that shorten lamp life and leave uneven results for clients.

A quick wipe with a soft, non-abrasive cleaner approved for acrylic keeps the surface clear and lets the hybrid technology work as intended. Avoid harsh chemicals that can cloud the acrylic.

Setup Steps

Choose the Right Location: Select a level, well-ventilated area with at least 3 feet of clearance around the bed. Confirm access to a dedicated electrical circuit that matches the bed's power requirements (check the manual for exact amperage). Verify the circuit is dedicated and not shared with other high-draw equipment.
Unbox and Inspect: Remove all packaging and inspect the bed for shipping damage. Check that all lamps, acrylic, and hardware are present. Report any missing or damaged parts immediately. Take photos of any damage before you start assembly.
Assemble the Bed Frame: Follow the manual to attach the legs and any support brackets. Tighten all bolts securely but avoid over-tightening, which can strip threads. Make sure the bed is stable and level. Use a level to confirm the bed is even; an uneven bed can cause uneven tanning.
Install Lamps and Acrylic: Carefully insert each UV and red light lamp into its socket, then place the acrylic shield. Wipe the acrylic with a soft, approved cleaner to remove fingerprints and dust. Never touch lamps with bare hands; use gloves or a cloth to avoid oil residue.
Connect Power and Test: Plug the bed into the dedicated outlet. Turn it on and verify that all lamps (UV and red light) illuminate. Test the timer and any safety features like the emergency stop. If any lamp is flickering or dead, replace it before the first session.
Perform a First-Session Check: Run a short test cycle (without a client) to ensure the bed heats up and the red light function activates. Confirm the timer counts down correctly and the bed shuts off as expected. Document the test results for your records and keep the manual accessible for future troubleshooting.

Product Facts

ProSun Onyx Hybrid – 15 Min. Level 3 Commercial Tanning and Red Light Bed: The ProSun Onyx Hybrid is a 15-minute Level 3 commercial tanning bed that combines UV and red light in one session. This hybrid design means you need to verify both the UV lamps and the red light LEDs are working during setup so clients get the full combined session.
ProSun Onyx Hybrid – 15 Min. Level 3 Commercial Tanning and Red Light Bed