How to Install the ProSun T-Max G2 Wireless Adapter

By Spray & Sun | Published: 2026-10-26

Category: How-to Guides

Step-by-step guide to installing the ProSun T-Max G2 Wireless Adapter, including what to check before you start and common mistakes to avoid.

Quick Answer

Install the ProSun T-Max G2 Wireless Adapter by connecting it to any wireless-ready T-Max timer, then pair the adapter with your access point to control your salon without running cables.

Before You Begin: Check Your Timer Compatibility

The T-Max G2 Wireless Adapter works only with T-Max timers that are wireless ready. Check your timer's model and documentation to confirm it supports the G2 wireless module before you start. If your timer is not wireless ready, you will need to upgrade the timer itself first, which is a separate project.

The adapter communicates using a 900MHz RF signal, so you do not need to run cables across your salon. This makes installation more flexible, but you should still plan the placement of the access point to stay within the 300-foot range.

What You Need

Gather the following items before starting: the ProSun T-Max G2 Access Point Wireless Adapter, a wireless-ready T-Max timer, and a small screwdriver if the adapter's housing requires opening. No special networking tools are required because the system uses RF, not Wi-Fi.

Installation Steps

Power Down the Timer: Turn off the tanning bed and disconnect the timer from power. This prevents any electrical risk while you handle the adapter. Never work on a live timer.
Connect the Adapter to the Timer: Locate the wireless-ready port on your T-Max timer and plug in the G2 adapter securely. Ensure it clicks into place so it won't loosen over time. A loose connection is a common cause of intermittent control issues.
Power Up the Timer: Reconnect the timer to power and turn it on. The adapter should power up along with the timer; check for any indicator light if available. If there is no light, verify the adapter is fully seated.
Set Up the Access Point: Place the G2 access point in a central location within 300 feet of the timer. Follow the manufacturer's pairing instructions to connect the access point to the adapter. Keep the access point away from large metal objects that can block the RF signal.
Test the Connection: Use your salon control system to send a command to the timer, such as turning on the bed. Confirm the timer responds correctly. Test from different locations to ensure full coverage.

Product at a Glance

ProSun T-Max G2 Access Point Wireless Adapter: The T-Max G2 Access Point Wireless Adapters allow you to control your salon without the need to run cables throughout your salon. The G2 Wireless modules use a 900MHz RF signal to communicate without the need to run cables. These G2 Wireless adapters can reach up to 300 feet. This means you can place the access point centrally and control timers throughout your salon without drilling or laying cable, saving installation time and keeping your space tidy.
ProSun T-Max G2 Access Point Wireless Adapter