Hybrid Red Light Lamps: RenuvaTan 200W Boxes Explained

Quick answer

Install ProSun RenuvaTan 200W hybrid lamps by matching the lamp length to your bed’s socket, replacing in complete sets, and testing each lamp before closing the canopy. Choose the box of 12 XL for longer beds and the box of 25 standard for full-bed refreshes or multi-bed studios.

Step-by-step hybrid lamp installation

1. Confirm lamp length and quantity: Measure an existing lamp or check your bed’s manual to determine whether it takes standard or XL length. Count the total number of lamps in the bed, then add spares to your order. Common mistake: ordering the box of 12 XL for a standard bed because the price per lamp looks lower—length is not interchangeable. Write the lamp length and count on the inside of the bed’s access panel so the next replacement is unambiguous.
2. Power down and let lamps cool: Switch off the bed at the breaker, not just the control panel, and allow lamps to cool completely before touching them. Common mistake: handling warm lamps with bare hands—skin oils can create hot spots that shorten lamp life. Keep a pair of clean cotton gloves with your spare lamps so they are always at hand.
3. Remove old lamps and inspect holders: Twist each lamp out gently and check the sockets for cracks, corrosion, or loose contacts. Replace any damaged holder before installing new lamps. Common mistake: forcing a lamp into a misaligned holder, which can crack the lamp end. Photograph the holder condition before installing so you have a baseline for the next service.
4. Install new lamps in matched sets: Replace all lamps in a canopy or bench at the same time rather than mixing old and new. Seat each lamp firmly but do not overtighten. Common mistake: leaving one old lamp in place to save money—mixed lamp ages produce uneven tanning and make session timing harder to manage. Mark the installation date on the lamp box lid and keep it with your maintenance log.
5. Test each lamp before closing the bed: Power on briefly and confirm every lamp lights evenly with no flicker or dark ends. Shut down immediately if a lamp fails to strike. Common mistake: closing the canopy before testing, then discovering a faulty lamp during a client session. Keep one spare lamp from the box accessible during the first week after installation.
6. Clean acrylics and reset session timing: Wipe acrylics with a compatible cleaner and review your session schedule. Because hybrid lamps add a red-light component, start clients at their previous timing and adjust based on feedback rather than extending sessions preemptively. Common mistake: assuming hybrid lamps require a longer session—start conservative and let results guide changes. Record the first week’s client feedback so you can make a timing decision based on experience, not guesswork.

Product facts

• ProSun RenuvaTan High Intensive 200w Hybrid Tanning Replacement Lamps – Box of 25: Box of 25 high-performance hybrid lamps for standard-length beds. A full box covers a complete bed refresh and leaves spares for mid-cycle replacements without reordering.

  

• ProSun RenuvaTan Intensive 200W XL Hybrid Tanning Replacement Lamps – Box of 12: Box of 12 Intensive 200W XL hybrid lamps for longer bed configurations. The XL length fits beds that standard lamps cannot reach, so verify your bed’s lamp length before ordering.