Voltar ao blog
Avaliações de Produtos 2026-11-21 Spray & Sun 0 visualizações

ProSun Cosmolux GSP 9K90 F71 100w Lamps: Compatibility Guide

ProSun Cosmolux GSP 9K90 F71 100w Lamps: Compatibility Guide

Find out which tanning beds accept the ProSun Cosmolux GSP 9K90 F71 100w bi-pin lamps, plus key specs and trade-offs to consider before buying.

What the Cosmolux GSP 9K90 F71 100w Lamps Fit

The ProSun Cosmolux GSP 9K90 F71 100w #10990 is a bi-pin tanning lamp designed for specific low-pressure tanning beds. Its F71 size and 100-watt rating mean it fits fixtures that accept bi-pin (not single-pin or RDC) lamps of that length and wattage. The supplied information confirms it is compatible with both home and commercial beds, and it works directly with original VLR (#18810) and VLR TT (#15212) lamp holders.

Before ordering, double-check that your bed uses bi-pin sockets and that the lamp length matches your existing F71 tubes. This lamp is not a drop-in replacement for single-pin or different-wattage systems.

Key Specifications at a Glance

Compatibility Checklist

To confirm fit, verify these points:

Your bed uses bi-pin lamp sockets (not single-pin or RDC).

The lamp length is F71.

The bed's ballast or transformer supports 100-watt lamps.

The lamp holder is original VLR (#18810) or VLR TT (#15212) — the Cosmolux GSP is confirmed compatible with both.

What Makes This Lamp Different

The Cosmolux 9K90 technology uses a four-phosphor blend (US Patents 7,122,952 and 6,984,931) to deliver high UVA output with UV maintenance above 90% at 100 hours. Its spectral peak is shifted to about 365 nm, which the manufacturer describes as mirroring filtered high-pressure lamps. This means you get high-pressure-like results from a low-pressure lamp, but the trade-off is that it requires a compatible ballast and socket type — it won't work in every bed.

Trade-Offs to Consider

The main trade-off is compatibility: bi-pin lamps are less common than single-pin in some older beds, so you must verify your socket type. Additionally, the 100-watt rating may not match beds designed for other wattages. The 16-24 minute exposure time is typical for high-output lamps, but if you are used to shorter sessions, this may feel longer. On the plus side, the rated life is competitive for a high-UVA lamp.

Artigos relacionados

Customer Service
Início
Produtos
Carrinho
Perfil