ProSun V3 42 Lamp Kit: Step-by-Step Replacement Guide

Quick Answer

Replace your ProSun V3 42 tanning booth lamps with the ProSun V3 42 Replacement Tanning Lamps Kit, which includes 42 Protech Hi Intensive R-UVA 75-inch 160W XL bi-pin lamps. Follow the steps below for a safe and efficient swap.

Step-by-Step Replacement Process

1. Turn off and unplug the booth: Ensure the tanning booth is completely powered down and unplugged from the electrical outlet before starting any work. Verify the booth is unplugged, not just switched off.
2. Remove the acrylic shields: Carefully remove the acrylic shields or diffusers that cover the lamps. Set them aside in a safe place to avoid scratches or damage. Handle shields by the edges to avoid fingerprints and smudges.
3. Twist and pull each old lamp: Gently twist each bi-pin lamp a quarter turn and pull it straight out from the socket. Support the lamp with both hands to avoid bending the pins. Do not force the lamp; if it resists, check for a locking mechanism or obstruction.
4. Insert the new lamp: Align the bi-pin ends with the socket holes, push the lamp gently into place, and twist a quarter turn to lock it in. Ensure the lamp is seated firmly but avoid overtightening.
5. Replace the acrylic shields: Reinstall the acrylic shields or diffusers, making sure they are securely fitted and aligned correctly. Check that no lamps are touching the shields; there should be a small gap.
6. Power up and test: Plug the booth back in and turn it on. Check that all 42 lamps light up evenly and there are no flickering or dark spots. If any lamp fails, turn off the booth and recheck the connection before replacing it.

Product Facts

• ProSun V3 42 Tanning Booth - Replacement Tanning Lamps Kit: The ProSun V3 42 Replacement Tanning Lamps Kit includes 42 Protech Hi Intensive R-UVA 75-inch 160W XL bi-pin lamps with a 1000-hour life expectancy. This kit provides the exact lamps needed for your ProSun V3 42 booth, ensuring consistent UV output and a straightforward replacement process.