ProSun RenuvaTan 110W Hybrid Lamps: Skin Benefits FAQ

Quick answer

The ProSun RenuvaTan 110W hybrid lamps pair traditional UV tanning output with a peak of red light in one lamp, so your equipment can deliver a tanning session and red light exposure together rather than as two separate steps.

Why hybrid output changes the session, not just the lamp

A standard tanning lamp is built around UV output alone. A hybrid lamp adds a red light peak to that same footprint, which means the skin receives both types of exposure during one pass under the canopy or bed. That is the practical difference: you are not adding a second device or a separate red light session to your routine, but you are also not getting a red-light-only treatment.

This matters most for people who already tan and want to keep their setup simple. It matters less for anyone looking for a dedicated red light therapy session with no UV at all, because the hybrid lamp still emits UV as its primary tanning function.

What the 110W rating does and does not tell you

The 110W figure describes the lamp's wattage, not its UV intensity, red light dose, or session time. Those depend on the equipment, the ballast, and the lamp's specific output curve, none of which are supplied here. Treat wattage as a compatibility and power draw reference, not a measure of tanning strength.

Before ordering, confirm that your unit is designed for lamps in this wattage class and that the lamp length and base type match your holders. If your equipment manual specifies a particular replacement lamp, follow that specification rather than assuming a higher or lower wattage will work.

Where the box of 12 makes sense, and where it does not

A box of 12 suits owners of multi-lamp beds or canopies who replace lamps as a set, and salons that keep spares on hand for mid-season swaps. Replacing all lamps at once keeps output consistent across the unit, which is harder to achieve when you mix old and new lamps.

If you run a single-lamp unit or only need one or two replacements, a full box is more inventory than you need. The catalog also lists a 160W XL version, so check which wattage your equipment actually calls for before choosing between them.

ProSun RenuvaTan 110W hybrid lamp FAQ

Do these lamps replace a separate red light session?

No. They add a red light peak to a UV tanning lamp, so the session still includes UV exposure. If you want red light without UV, choose a dedicated red light lamp instead.

Will the 110W lamps fit my bed or canopy?

Only if your equipment is rated for lamps in this wattage class and the lamp length and base match your holders. Check the manual or the label on your current lamps before ordering. Match wattage, length, and base type first; wattage alone is not a fit guarantee.

How many lamps do I need for a full replacement?

Count the lamp positions in your unit. A box of 12 covers 12 positions; if your bed holds fewer, you will have spares, and if it holds more, you need additional boxes.

Should I mix new hybrid lamps with old lamps?

Avoid it where possible. Mixed-age lamps can produce uneven output across the unit, so replace in full sets when you can.

Is the 160W XL version a better choice?

Only if your equipment is specified for that wattage. Do not step up in wattage unless the unit is rated for it; use the wattage your manual calls for.

Product facts

• ProSun RenuvaTan 110w Hybrid Tanning Replacement Lamps – Box of 12: Box of 12 hybrid lamps combining traditional UV tanning power with a peak of red light. One box covers a full multi-lamp unit and keeps every lamp in the session matched.