Back to Blog
Comparisons 2026-11-20 Spray & Sun 0 views

ProSun ProTech II 160w vs 140w Replacement Lamps

ProSun ProTech II 160w vs 140w Replacement Lamps

Compare ProSun ProTech II 160w and 140w R-UVA lamps. Learn key differences in wattage, length, and compatibility for your tanning bed.

Choosing Between ProSun ProTech II 160w and 140w Lamps

When it's time to replace the lamps in your tanning bed, the ProSun ProTech II series offers two high-output R-UVA options: a 160w lamp and a 140w lamp. Both are designed for powerful tanning results and salon-grade durability, but they differ in wattage and physical length. Your choice depends entirely on what your tanning bed was designed to accept.

This comparison focuses on the key differences that matter for a successful replacement: wattage, lamp length, and compatibility. We'll rely on the supplied product records to highlight what is confirmed and what you need to verify before ordering.

What the Product Records Confirm

  • ProSun ProTech II High Intensive R-UVA 160w 1.9m Replacement Lamps #3167 – Box of 12: 160W output – compatible with most standard tanning beds. Each lamp rated for up to 800–1,000 hours of use. The 160w lamp delivers higher output, which may suit beds designed for that power level. The 800–1,000 hour lifespan is a key factor for replacement planning.
    ProSun ProTech II High Intensive R-UVA 160w 1.9m Replacement Lamps #3167 – Box of 12
    ProSun ProTech II High Intensive R-UVA 160w 1.9m Replacement Lamps #3167 – Box of 12
  • ProSun ProTech II High Intensive R-UVA 140w Replacement Lamps #3168– Box of 12: 140W output – compatible with most standard tanning beds. Each lamp rated for up to 800–1,000 hours of use. The 140w lamp offers a slightly lower power draw. Both lamps share the same rated lifespan, so the main trade-off is output versus compatibility.
    ProSun ProTech II High Intensive R-UVA 140w Replacement Lamps #3168– Box of 12
    ProSun ProTech II High Intensive R-UVA 140w Replacement Lamps #3168– Box of 12

Key Differences at a Glance

  • Wattage: The 160w lamp (product 1126018) draws more power than the 140w lamp (product 1126038). Higher wattage typically means stronger UV output, but only if your bed's ballasts and wiring are rated for it.
  • Lamp Length: The 160w lamps are 1.9m long, while the 140w lamps are 59″. These are different physical sizes, so they are not interchangeable in the same fixture. Measure your current lamps or check your bed's specifications before ordering.
  • Connector Type: Both lamps use a bi-pin end style (two exposed metal pins on each end). This is a common connector, but always confirm that your bed's lamp holders accept bi-pin lamps.

Compatibility: The First Thing to Verify

Both product records state compatibility with 'most standard tanning beds,' but this is a general claim. The critical factor is whether your bed is designed for 160w or 140w lamps, and whether the lamp length matches your bed's internal dimensions.

The ProSun ProTech II 160w lamp is listed as an OEM replacement for ProSun tanning beds. The 140w lamp is also described as an OEM replacement for ProSun beds. If you own a ProSun bed, these are likely the correct replacements—but double-check your bed model against the wattage and length requirements.

For non-ProSun beds, you will need to verify that the wattage, length, and connector type match your existing lamps. The supplied information does not include a compatibility chart for other brands.

What the Supplied Information Does Not Settle

The product records do not specify the exact lamp diameter, the required ballast type, or the operating voltage. These are important for safe installation, but they are not confirmed in the available evidence.

If you are unsure whether your bed can handle a 160w lamp, consult your bed's manual or contact the manufacturer. Installing a lamp with a higher wattage than your bed is designed for can cause overheating or damage.

Related Articles

Customer Service
Home
Products
Cart
Profile