Start with your bed model, not the session time
The ProSun Luxura X5 and V6E lamp kits are both OEM replacement kits, but they are built for different tanning units. The X5 kit is a 12-minute kit with 41 lamps, while the V6E kit is a 9-minute kit with 48 lamps. That difference in lamp count and session time is your first clue that these kits are not interchangeable.
Before you compare wattages or prices, confirm which ProSun Luxura model you own. The kit names refer to specific beds, and each kit's lamps are certified compatible only with the corresponding unit. If you are unsure, check the model plate on your bed or your owner's manual before ordering.
Lamp counts and wattages side by side
- ProSun Luxura X5 12 Minute OEM Replacement Lamp Kit: 22 x ProTech II High Intensive R-UVA 160w Tanning Lamps (canopy), 16 x ProTech II High Intensive R-UVA 180w XL Tanning Lamps (bench), and 3 x Protech HP 400 Facial Lamps. Total: 41 lamps.
- ProSun Luxura V6E 9 Minute OEM Replacement Lamp Kit: 48 x ProTech II Ultra Intensive R-UVA 200w XL Tanning Lamps (panel/door). Total: 48 lamps.
What the X5 kit's lamp mix tells you
The X5 kit uses three different lamp types to serve three positions in the bed. The 160w lamps are specified for the canopy, the 180w XL lamps for the bench, and the 400 facial lamps for the facial area. This mix is typical of a bed that separates upper and lower tanning zones and includes facial tanning.
If your X5 bed has a different lamp configuration or you are unsure which lamp goes where, do not guess. The kit is certified compatible with the X5 unit, but the listing does not provide installation instructions. Use your bed's manual or consult a qualified technician for placement.
What the V6E kit's single lamp type means
The V6E kit uses 48 identical 200w XL lamps for the panel and door. That uniformity simplifies replacement: every lamp in the kit is the same model, so you do not need to sort canopy, bench, and facial lamps. The 9-minute session time and 200w rating suggest a higher-output system than the X5, but the supplied information does not include UV output or tanning performance data, so we cannot compare those aspects.
Compatibility and key specs from the listings
- ProSun Luxura V6E 9 Minute OEM Replacement Lamp Kit: 48 x ProTech II Ultra Intensive R-UVA 200w XL Tanning Lamps (Panel/Door) Confirms the lamp count and wattage for the V6E kit, so you can check against your bed's requirements.

ProSun Luxura V6E 9 Minute OEM Replacement Lamp Kit - ProSun Luxura V6E 9 Minute OEM Replacement Lamp Kit: This lamp kit has replacement lamps that are certified compatible for the tanning unit. Certified compatibility is the main assurance that the lamps will fit and function safely in the intended ProSun Luxura V6E unit.
- ProSun Luxura X5 12 Minute OEM Replacement Lamp Kit: 22 x ProTech II High Intensive R-UVA 160w Tanning Lamps (Canopy), 16 x ProTech II High Intensive R-UVA 180w XL Tanning Lamps (Bench), and 3 x Protech HP 400 Facial Lamps Shows the X5 kit's three lamp types and counts, which must match your bed's canopy, bench, and facial positions.

ProSun Luxura X5 12 Minute OEM Replacement Lamp Kit - ProSun Luxura X5 12 Minute OEM Replacement Lamp Kit: This lamp kit has replacement lamps that are certified compatible for the tanning unit. Certified compatibility for the X5 unit means the kit is designed specifically for that bed, not a universal fit.
Bi-pin base: a shared detail to verify
Both kits use bi-pin lamps, according to the listings. Before ordering either kit, check that your bed's lamp holders accept bi-pin lamps. The listings include images of the lamp base, which you can compare with your current lamps. If your bed uses a different base type, neither kit will fit.
Session time and lamp life
The X5 kit is labeled as a 12-minute kit, and the V6E kit as a 9-minute kit. These times likely refer to the maximum session time for the bed when equipped with these lamps, but the listings do not explain how the time is determined. Do not assume you can shorten or lengthen sessions by swapping kits; the session time is a property of the bed and lamp combination, not a user setting.
Both kits list a life expectancy of 1000 hours. That figure is supplied by the manufacturer as an estimate. Actual lamp life depends on usage and operating conditions, so plan replacements accordingly.
Price and value considerations
At catalog prices, the X5 kit is $670.39 (compared to a $1,099.00 comparison price), and the V6E kit is $883.32 (compared to $1,299.00). The V6E kit costs more, which is consistent with its higher lamp count (48 vs 41) and higher wattage (200w vs 160w/180w). However, price should not drive your choice: the correct kit is the one certified for your bed. A kit that does not fit is a costly mistake regardless of discount.
What the listings do not settle
The supplied information does not include installation instructions, UV output data, or compatibility with beds other than the specified ProSun Luxura models. It also does not state whether the lamps are compatible with other brands or older ProSun models. If your bed is not a ProSun Luxura X5 or V6E, contact the manufacturer or a qualified technician before ordering.
Additionally, the listings do not provide guidance on disposal of old lamps or handling procedures. Follow local regulations and your salon's policies for lamp disposal.
How to decide
First, identify your bed model. If you own a ProSun Luxura X5, the X5 kit is the certified match. If you own a ProSun Luxura V6E, the V6E kit is the certified match. Do not substitute one for the other, even if the lamp counts seem close.
Second, verify the lamp base type. Both kits use bi-pin lamps, so confirm your bed's holders are compatible. Third, consider the lamp mix: the X5 kit requires you to install different lamps in specific positions, while the V6E kit uses identical lamps throughout. If you are uncomfortable with position-specific installation, have a technician handle it.
Finally, check the session time labeling against your bed's manual. The 12-minute and 9-minute labels are likely tied to the bed's design, but confirm with your manual to avoid confusion.



