ProSun Luxura V6 Acrylic Panel Replacement: What to Know

By Spray & Sun | Published: 2026-11-03

Category: Tips & Care

Follow a step-by-step process to replace the main acrylic panel on your ProSun Luxura V6 tanning booth, with checkpoints to avoid common mistakes and care tips.

Quick answer

Replace the main acrylic panel on your ProSun Luxura V6 when you see cracks, cloudiness, or uneven tanning that cleaning won’t fix. Order the correct main panel, not a door panel, and follow the steps below to swap it safely and keep your booth performing.

Why the main panel is different from door panels

The Luxura V6 uses separate acrylic pieces for the main tanning surface and the door. The main panel bears the brunt of daily use and UV exposure, so it often needs replacement first. Using a door panel in the main position can cause fit issues and uneven performance. Always confirm you’re ordering the main panel for your specific model.

When to replace instead of clean

Surface smudges and lotion buildup usually come off with a proper acrylic cleaner. But if you notice fine cracks, a hazy or yellowed appearance that won’t clear, or a rough texture that catches on a cloth, the acrylic is breaking down. Those signs mean it’s time to replace the panel, not scrub harder. Replacing early protects the tanning lamps and keeps output consistent.

Care that extends panel life

After installation, clean the acrylic only with products approved for tanning beds, and avoid ammonia-based glass cleaners that can cloud the surface. Wipe gently with a soft cloth, and keep sharp objects away from the panel. These habits slow wear and help you get the most from your replacement.

Step-by-step main acrylic panel replacement

Confirm you have the main panel, not a door panel: Check the product listing or packaging to verify it’s the main panel for the Luxura V6. A common mistake is ordering a door panel by accident, which won’t fit the main opening correctly. Match the part to the main panel position before you start.
Power down and unplug the booth: Turn off all controls and disconnect the power cord. Let the unit cool completely if it was recently used. Skipping this step risks electrical shock or burns. Safety first: no power during the swap.
Remove the old panel carefully: Unscrew or release the retaining clips according to your model’s design, then lift the old acrylic out with both hands. Avoid prying with sharp tools that could damage the frame or nearby lamps. If the panel feels stuck, check for hidden fasteners before forcing it.
Clean the frame and inspect seals: Wipe away dust and old residue from the frame channel. Check that any foam or rubber seals are intact; replace them if compressed or torn. A common mistake is skipping this step, which can cause rattles or uneven seating. A clean, intact frame helps the new panel sit flush.
Fit the new panel and secure it: Lower the new acrylic into place, aligning it with the frame edges. Reinstall retaining clips or screws finger-tight first, then snug them evenly. Over-tightening can crack the acrylic, so stop when the panel is held firmly without flexing. Even, gentle pressure prevents stress cracks.
Power up and test for fit and function: Reconnect power and turn on the booth. Check that the panel sits flush and doesn’t rattle. Run the unit briefly to confirm lamps and fans work normally. If you notice any vibration or misalignment, power down and adjust the fasteners. A quick test now catches issues before your next session.

Product facts

ProSun Luxura V6 Main Panel Replacement Acrylic: This replacement acrylic panel is designed for the Luxura V6 main panel position, not the door panels. Ordering the correct part ensures proper fit and avoids return hassles, so you can complete the replacement in one go.
ProSun Luxura V6 Main Panel Replacement Acrylic