What the ProSun RenuvaSkin L3200 OEM Lamp Kit Contains
The ProSun RenuvaSkin L3200 OEM Replacement Lamp Kit is a full factory replacement kit designed specifically for the ProSun RenuvaSkin L3200 tanning bed. It includes 32 RenuvaSkin 120W Red Light Reflector lamps. This kit is intended for users who want to replace all lamps at once, ensuring consistent performance and even red light output across the bed.
Kit Contents at a Glance
- ProSun RenuvaSkin L3200 OEM Replacement Lamp Kit: Full Factory replacement lamp kit for the ProSun RenuvaSkin L3200. Kit Includes: 32 x RenuvaSkin 120W Red Light Reflector lamps. Knowing exactly what's included helps you verify you have all components before starting. The 32-lamp count matches the L3200 bed's configuration, so no additional lamps are needed.

ProSun RenuvaSkin L3200 OEM Replacement Lamp Kit
Installation Steps
Before you begin, ensure the tanning bed is unplugged and completely cool. Work in a well-lit area and have a Phillips-head screwdriver and a soft cloth ready for handling lamps.
- 1. Remove the old lamps: Open the tanning bed canopy and acrylic shield. Carefully twist each old lamp to release it from the sockets. Place them in a safe disposal area. Avoid touching the glass of new lamps with bare hands to prevent oil transfer.
- 2. Inspect sockets and wiring: Check that all lamp sockets are clean and free of corrosion. Look for any damaged wiring or loose connections. If you see issues, consult a professional before proceeding.
- 3. Install the new RenuvaSkin 120W Red Light Reflector lamps: Hold each new lamp by the ceramic ends (or use a clean cloth). Align the pins with the socket slots and gently push and twist to lock into place. Repeat for all 32 lamps.
- 4. Reassemble and test: Replace the acrylic shield and close the canopy. Plug in the bed and turn it on briefly to confirm all lamps illuminate. If any lamp does not light, check its connection or swap with a known working lamp to isolate the issue.
Compatibility and Important Notes
This kit is designed exclusively for the ProSun RenuvaSkin L3200. The supplied information confirms it is a full factory replacement kit, meaning it includes all necessary lamps for a complete swap. However, the listing does not provide specific installation instructions or safety warnings beyond the standard lamp handling precautions. If your bed model is not the L3200, confirm compatibility with the manufacturer before ordering. The kit's economical operation for the amount of tanning power is a benefit, but it is not a substitute for following all manufacturer safety guidelines during installation.


